Mounting instructions

Need help to mount your new product? 
-You have reached your destination!

Mounting instruction for sequence indicators:

Same for all years and models:

Our Sequence indicators for various Harley Models are easy to mount. Losen your mirrors as your new indicators mounts with the steem from your mirror. Make sure you have read the electrical guide below before cutting any wires. Make sure that you have enough wire left to secure a easy splicing of the new to old wires. After cutting to desired length, splice and seal the wires and mount together with your mirror. Check everything is tightend to factory spec for your year and model and check function before making your way back to the road. 

Electrical guide: (Make sure you disconnect the ground cable from the battery before cutting or spicing any wires.)

Licenseplate light:

Yellow = 12v

Black = Ground

Mounting instruction for license plate frames:

0.0 Version (Denmark only)

This License plate frame for Danish size numberplates is a universal product. Milled from one piece of aluminium and ready to be mounted how it suits you. Simply mark the mounting holes you need and use a drill to make the desired mounting. 

2.0 Version (Denmark only) 

This License plate frame for Danish size numberplates is a universal product. Milled from one piece of aluminium and ready to be mounted how it suits you. Simply mark the mounting holes you need and use a drill to make the desired mounting.

Electrical guide: (Make sure you disconnect the ground cable from the battery before cutting or spicing any wires.)

Licenseplate light:

Red = 12v

Black = Ground

3in1 lights:

Black = Ground

Red= Stop light

Yellow = Rear light

Blue = Indicator

3.0 Version (Denmark, France, Germany, Italy, Netherlands)

This License plate frame for Danish size numberplates is a universal product. Milled from one piece of aluminium and ready to be mounted how it suits you. Simply mark the mounting holes you need and use a drill to make the desired mounting.

Electrical guide: (Make sure you disconnect the ground cable from the battery before cutting or spicing any wires.)

Licenseplate light:

Red = 12v

Black = Ground

3in1 lights:

Black = Ground

Red= Stop light

White = Rear light

Yellow = Indicator

5.0 Version (Denmark, France, Germany, Italy, Netherlands)

This License plate frame for Danish size numberplates is a universal product. Milled from one piece of aluminium and ready to be mounted how it suits you. Simply mark the mounting holes you need and use a drill to make the desired mounting.

Electrical guide: (Make sure you disconnect the ground cable from the battery before cutting or spicing any wires.)

Licenseplate light:

Red = 12v

Black = Ground

 

Mounting instruction for under fender license plate brackets:

Dyna

Coming Soon

Softail M8

Coming Soon

XL Sportster

Coming Soon

XL Roadster

Coming Soon

Softail Blackline

Coming Soon

Mounting instruction for on fender license plate blocks:

Small

Coming Soon

Large

Coming Soon

Mounting instruction for Upper fork covers:

Softail M8 / Dyna XL / Sportster

Coming Soon

Mounting instruction for Fork Top caps:

Softail M8 & Dyna models

Coming Soon

Mounting instruction for Lower Fork covers:

Softail M8 & Dyna models

Coming Soon

Mounting instruction for M8 Softail Legacy Gastank:

Softail M8 models.

Note: Gasoline is extremly flameable, be carefull. 
Remove the stock gastank according to the Harley-Davidson manual for your model, we recommend you disconnect the battery.

Once the stock gastank is removed and empty for gasoline, you need to remove the fuel pump as this assembly will be reused. Secure the gastank and unscrew the 5 bolts from the fuelpump assembly. Be carefull when removing the fuelpump, start with the yellow gas filter. 
 

1: Cut the ziptie and remove the venting tube.

 

2: Use the supplied sealing tape on the supplied 3/8" bolt, mount as illustrated.

 

3: Modify the wire from the floater as illustrated.

 

When the modifications to the fuel pump are completed as above, carefully install the fuel pump assembly in the new DMP gas tank and tighten to factory spec. Proceed to mount the gas tank as descriped in the Harley-Davidson manual. Add fuel and check for leaks. 
Start riding!